The Tacbecon Moly Plus 2 is a general purpose lithium grease with molybdenum disulfide and extreme pressure (EP) additives. Made with mineral based oil, use for roller bearings, sliding bearings, chassis, axles, and universal/ball joints.
Product Description
Tacbecon Moly Plus 2 is a general purpose grease, formulated with lithium thickener and solid lubricant that offer good load-carrying ability.
Available Packaging
18 kg Pail, 180 kg Drum
Product Specification
| Typical Property | Test Method | Test Result |
| Colour, Appearance | Visual | Dark Grey, Smooth |
| Base Oil | – | Mineral |
| Thickener | – | Lithium |
| Solid Lubricant | – | Molybdenum Disulphide |
| NLGI Grade | ASTM D 217 | 2 |
| Base Oil Viscosity @40 C, cSt | ASTM D 445 | 140 |
| Penetration W60@25 C, 0.1mm | ASTM D 217 | 265 – 295 |
| Dropping Point, C | ASTM D 2265 | ≤180 |
| Water Washout @80 C, % wt loss | ASTM D 1264 | < 5 |
| Timken OK load, lb | ASTM D 2509 | 55 |
| Fourball weld load, kg | ASTM D 2596 | 350 |
| Fourball Wear Scar, mm | ASTM D 2266 | 0.55 |
| Recommended Operating Temperature, C | – | -25 to 130 |
| Intermittent Maximum Temperature, C | – | 160 |
Special urea grease designed for appropriate lubrication management of machine moving parts
High temperature graphite grease with synthetic based oil. Use for kiln car bearings, furnace door gear, and drying tunnels where temperature up to 600°C is expected.
Special application greases with extreme pressure (EP) and moly additives. Made with lithium-complex thickener and mineral base oils, use for heavy-duty and slow moving bearings subjected to high shock loads.
Silver die paste for protection against soldering especially on start-ups or during cold shots in the production of aluminum die castings
High temperature multi-purpose Alassca complex grease with high viscosity mineral based oil. Use for applications under high loads, exposed to high water washout or high temperatures.
Covering and drossing-off granular flux for molten aluminum alloys
Specialty grease made with lithium soap and molybdenum compound, use for plastic injection molding machine
Resource One is a PEZA registered lubrication solutions provider located at Laguna Technopark, Inc.
Our Customer Support Team is ready to assist you! Call us at:
Fill out the contact form to ask us about a specific product, request for quotation, or technical consultation.
By submitting this form, you agree to our Privacy Policy
By submitting this form, you agree to our Privacy Policy
Get our free case study to learn how we help solve the lubrication challenges of our customers
By submitting this form, you agree to our Privacy Policy