EXTREME PRESSURE GREASES

Conventional Lithium-Mineral Oil greases that will suit general applications.  Contains Extreme Pressure (EP) additives.  Use Petrogrease EP 00 and 0 for Centralized or Automatic Lubricating Systems.

COLOR

APPEARANCE

VISCOSITY AT 40°C (CST)

NLGI #

Petrogrease EP 00 Gray Uniform/smooth 25 00
Petrogrease EP 0 Gray Uniform/smooth 115 0
Petrogrease EP 1 Gray Uniform/smooth 200 1
Petrogrease EP 2 Gray Uniform/smooth 200 2

AVAILABLE IN 16 KG PAIL AND 180 KG DRUMS

Tacbecon SG series greases are fortified with extreme pressure (EP) additives and anti-rust protection.  Thickened with Lithium-Calcium soap, this grease exhibits better water-resistance and washout properties compared to conventional EP greases.  Furthermore, this range performs at 300 to 400 kg weld load on a standard 4 ball wear test.

BASE OIL

BASE OIL VISCOSITY (CST AT 40°C)

THICKENER

NLGI

SPEEDS

OPERATING TEMPERATURE RANGE (°C)

SG200S Mineral oil 200 Li-Ca 2 Up to 3000 rpm -20 to 120
SG500 Mineral oil 500 Li-Ca 2 Up to 1500 rpm -20 to 120
SG1000S Mineral oil 1200 Li-Ca 2 1000 rpm and below -20 to 120

AVAILABLE IN 18 KG AND 180 KG DRUMS

FOOD GRADE GREASES (NSF H1 RATED)

PRODUCT

BASE OIL

BASE OIL VISCOSITY (CST AT 40°C)

THICKENER

PENETRATION (NLGI #)

APPLICATION TEMPERATURE (°C)

APPLICATIONS

Anderol PQAA #2* White Oil 160 Aluminum complex 2 -20 to 140 Bearings, Seaming machine, bottling equipment
Anderol 783-2* PAO 350 Aluminum complex 2 -45 to 160 Bearings, Seaming machine, bottling equipment
Teccem Fluoronox M44/2** PFPE 420 PTFE 2 -25 to 260 Oven bearings, segment moulds, barrier / sealing grease

AVAILABLE IN 400 GRAM CARTRIDGES (*), 1 KG CANS (**), 18 KG PAILS and 180 KG DRUMS

MULTI-PURPOSE EP GREASES

Conventional Lithium-Mineral Oil greases that will suit general applications.  Contains Extreme Pressure (EP) additives.  Use Petrogrease EP 00 and 0 for Centralized or Automatic Lubricating Systems.

COLOR

APPEARANCE

BASE OIL VISCOSITY (CST AT 40°C)

NLGI #

Petrogrease EP 00 Gray Uniform/smooth 25 00
Petrogrease EP 0 Gray Uniform/smooth 115 0
Petrogrease EP 1 Gray Uniform/smooth 200 1
Petrogrease EP 2 Gray Uniform/smooth 200 2

AVAILABLE IN 16 KG PAILS AND 180 KG DRUMS

SPECIAL APPLICATION GREASES

For extreme applications, in terms of load, speed, temperatures, and high contamination environments, there is surely a product that will fit your requirements.

BASE OIL

BASE OIL VISCOSITY (CST AT 40°C)

THICKENER

TEMPERATURE RANGE (°C)

SPEED

LOAD

SOLID LUBRICANTS

APPLICATION OR FEATURES

Tacbecon Kopal EP2 Mineral oil 160 Lithium complex -20 to 140 Moderate Moderate N/A Tacky grease for bearings, small gears, cams, slides and hinges.
Tacbecon Moly Plus 2 Mineral oil 140 Lithium -25 to 130 Moderate High Molybdenum disulfide Excellent load carrying capacity  and extremely good water resistance
SGHT 600 Synthetic base oil 130 Graphite -30 to 600 Moderate High Graphite Kiln car bearings, furnace door gear, drying tunnels
Syntech Barium Complex M2 Mineral oil 220 Barium complex -25 to 150 Moderate Moderate N/A Resistant to fluids, acids and alkaline solutions
Syntech Procalith EP2 Mineral oil 100 Li-Ca -30 to 120 Moderate Moderate N/A For automatic lubricating systems, very low oil separation
Syntech RL105 Mineral oil 450 Bentone -30 to 120 N/A High Molybdenum disulfide Excellent penetration in wire ropes
Teccem Fluoronox M40/2* PFPE 420 PTFE -25 to 260 Low Moderate PTFE Oven bearings, segment moulds, barrier / sealing grease

AVAILABLE IN 18 KG PAILS, AND 180 KG DRUMS
*AVAILABLE IN 1 KG CANS ONLY